Procedure For Training Conveyor Belts

How & Where To Start

1. Square all troughing idlers, return rolls, tail, head, take up, bend, snub, and drive pulleys that apply.

2. Check counterweight and the sag on return and troughing rolls.

3. Check all center rolls on troughing idlers and return rollers for proper contact.

4. Check (straight troughing idler stands) or (tilted troughing idler stands), and make necessary corrections, if any.

5. The Training adjustments will start at the head end of the conveyor on the return side. All of the return rolls will be checked and adjusted if necessary to the tail pulley.

6. After the ruturn side is trained and running true, start training the top carrying side troughing idlers from the tail end toard the head end of the conveyor.